top of page

Dual purpose mobile mapping and drone LiDAR systems

The best of both worlds, to recreate your world! For some projects, you need drone LiDAR. For others, you need mobile mapping LiDAR. And for others you need multiple perspectives from both. Buy one sensor to work a multitude of projects.

MOBILE MAPPING SOLUTIONS

Now Available: Addition of Mobile Mapping Capability via Vehicle Mount and Integration

GeoCue now offers customers a flexible TrueView lineup that enables users to collect data from the air, or via mobile mapping rig. Setup is easy and intuitive, giving users the ability to complement their aerial data with data captured from a ground vehicle. Three mobile mapping packages including fully integrated hardware and software are available to meet your project needs.

Mobile Mapping Compatible Sensors:

Basic

Mobile Mapping Kit

  • Vehicle Mount (Fixed roof & cabling kit)

  • Land GNSS Antenna

  • POSPac MMS (specific for Mobile Mapping)

Pro

Mobile Mapping Kit

  • Vehicle Mount (Fixed roof & cabling kit)

  • Land GNSS Antenna

  • POSPac MMS (specific for Mobile Mapping)

  • DMI (connected to vehicle’s rear wheel) with cabling + SW module


Optional

  • Swivel plate (rotating plate)

  • 360 degree Camera Integration Mounting kit: Mast, Dedicated SW (Colorization and visualization) and cabling

  • 360 degree Flir LadyBug Camera

  • Talk to a LiDAR expert

Expert

Mobile Mapping Kit

Compatible only with the TrueView 600 Series

  • Vehicle Mount (Fixed roof & cabling kit)

  • Land GNSS Antenna

  • POSPac MMS (specific for Mobile Mapping)

  • DMI (connected to vehicle’s rear wheel) with cabling + SW module

  • Additional Expert Software Modules

 

Optional

  • 360 degree Camera Integration Mounting kit: Mast, Dedicated SW (Colorization and visualization) and cabling

  • 360 degree Flir LadyBug Camera

What is the basic set-up for our Mobile Mapping Kit?

This is the basic package the customer will need to purchase to start using their LiDAR payloads for some Mobile mapping applications.

Talk to a LiDAR expert

a) Firmware & Software

b) Vehicle Mount

c) Land GNSS Antenna

What is the basic set-up for our Mobile Mapping Kit?

This is the basic package the customer will need to purchase to start using their LiDAR payloads for some Mobile mapping applications.

Talk to a LiDAR expert

a) Firmware & Software

b) Vehicle Mount

c) Land GNSS Antenna

DMI

The DMI is connected to the wheel of the vehicle and connected to the board of the mobile mapping system.

​

When driving in cities, customers face GNSS masks due to onstructions such as buildings, tunnels,etc.

​

The DMI compensates by providing information such as distance.

​

The DMI is very specific to the wheel used. The customer will be required to provide information before purchasing the correct DMI.

Teledyne Flir Ladybug Camera

The 360° camera allows you to collect imagery as the Lidar will only generate a point cloud.

​

The 360° camera will be installed on a fixed mast and will be delivered with visualisation software.

​

The 360° camera will also be used to colorize the point cloud.

Swivel plate (rotating plate)

Our LiDAR standard mount has a fixed position on the vehicle.

 

To collect as much data as possible, the customer may need to make several paths using different angles to collect data.

 

This is why we have designed and offer a specific plate giving the possibility to rotate the scanner 0°-15°-30°.

 

The customer will make several paths using different angles and will therefore collect more data.

Use LP360 for data processing

Process your mobile mapping data with LP360.

Manage your mobile mapping project in real time, using the dedicated application
Easily configure your equipment when switching from drone to mobile mapping data collection.
Easily import, view, share and work with your data in LP360. Generate colorized pointclouds using the 360 degree camera in cooperation with your TrueView sensor.
bottom of page